TerraForums - Carnivorous Plant Community
Welcome to TerraForums — a long-running carnivorous plant community established in 2001. Register for free to join the conversation, ask questions, and connect with growers from around the world.
NASC Auction will open in...
Read the rules first :)
NASC auction is OPEN!!
Share this page
Wow; beautiful against the sand background. Thanks for sharing!
jimscott
Tropical Fish Enthusiast
Yeah... what he said!
Nice shots. I have to agree with you. D. 'Lake badgerup' was a nice pygmy self-esteem booster for me, since they don't seem to be affected at all by heat, unlike the rest of the pygmy gang. The first time I tried 2 species of gemmae, D. scorpioides all died from noobie abuse, but D. 'Lake Badgerup' kept growing like a Capensis.
well...just caught the flu, and haven't slept for 4 hours- so why not visit TF? 
It is typical to put a layer of .5-1+ inch (whatever you feel comfortable with) of sand at the surface and then use a peat:sand mix beneath this (the pot should be around 5-6+ inches tall if you want the largest growth). I've read that in nature, the the layer of sand is much thicker in some locations.
However, this species is so adaptable that it's done ok even in a 3 inch pot. My largest specimens (which I recently gave away) grew a 3/4-inch skirt in one year of growth, even though I used a 50 peat 50 perlite mix (which normally does not work for me).
here is a pic of the plants I used perlite with:
higher-res: http://www.growsundews.com/sundews/pygmies/Lake_Badgerup-hi.JPG
As you can see, these guys grew well even with crusted-over orange algae foaming at the top- Before I knew that I should rinse the peat before using it
)
(the pot is a 2-L bottle with the curvy top cut off, so they're in at least ~7 inches of media there)
It is typical to put a layer of .5-1+ inch (whatever you feel comfortable with) of sand at the surface and then use a peat:sand mix beneath this (the pot should be around 5-6+ inches tall if you want the largest growth). I've read that in nature, the the layer of sand is much thicker in some locations.
However, this species is so adaptable that it's done ok even in a 3 inch pot. My largest specimens (which I recently gave away) grew a 3/4-inch skirt in one year of growth, even though I used a 50 peat 50 perlite mix (which normally does not work for me).
here is a pic of the plants I used perlite with:
higher-res: http://www.growsundews.com/sundews/pygmies/Lake_Badgerup-hi.JPG
As you can see, these guys grew well even with crusted-over orange algae foaming at the top- Before I knew that I should rinse the peat before using it
)(the pot is a 2-L bottle with the curvy top cut off, so they're in at least ~7 inches of media there)
. I can only hope my results are as good!
nightsky
Lover of Mountains
I did as cpholic said, a 50/50 mix of sand and peat, topped with about a half inch of sand.
I should have made the sand layer a little deeper; on another pygmy pot the sand is discolored from the peat below. I think if it was thicker this wouldnt have happened.
Btw cpholic your badgeruos look great!
I should have made the sand layer a little deeper; on another pygmy pot the sand is discolored from the peat below. I think if it was thicker this wouldnt have happened.
Btw cpholic your badgeruos look great!
Similar threads
