What's new
TerraForums Venus Flytrap, Nepenthes, Drosera and more talk

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

simple minded greenhouse design

losfreddy

Composter
I took 3 pvc pipes and 4 elbow joints. Cut one pvc in half and made into rectangle.. taped the corners with duct tape and twisted it. Fold it over. May need help. I used shrink wrap for postal packaging to hold the structure where it needs support to keep from laying back out. And progress to wrap it. cheap and simple. Designed is for porch use.. I'm going to stick all my potted plants in it. about 5'x5' square.

design.jpg

greenhouse1.jpg
 
That turned out quite well!

You know you can get the special 3 way connector that could help you out from here:
http://www.littlegreenhouse.com/accessory/pvc.shtml

That could make your joints stiffer... and if you want them solid use PVC glue. You can get a little can (the site has it too) for like $3. Be careful though! The glue -does not mess around- and will bond the pipes together permanently in under 5 seconds.

-Nate
 
Back
Top