What's new
TerraForums - Carnivorous Plant Community

Welcome to TerraForums — a long-running carnivorous plant community established in 2001. Register for free to join the conversation, ask questions, and connect with growers from around the world.

how do I build a grow chainber

i need to add humidety to my nep should a grow chainber be suitable if so how do I make one
wink.gif
 
I had done something that might work for you.
I had used the lower part of terrarium table and close it with wood covered with plastic cover so the humidity wouldn't harm the wood.
On the front side I have used glass sliding doors.
on the bottom I have build a water tray from glass 4" high there are water in it about 3" high and a net cover the water and it used as a base to the Nepenthes pots.
There is small old computer fan work with timer also 2 32W saving energy fluorescent lamps mount to the top of the chamber.
The humidity in this chamber is about 80%.

you can see here a photo of it
grow_cab.jpg

arie
 
Nice set-up, Arie! That's a lot of neps. What do you do when they get bigger?

Suzanne
 
At my site you can find a quick lesson on building an enclosure. At step 5 instead of putting wood panels on the back and sides staple a big plastic painting drop cloth from home depot to keep the humdiity up (I learned this after I built the one shown on the site). If you can follow the steps (I'm working on another version with better step definitions) you can use the same steps to make any size enclosure you need/want. The one on the site is 48" high x 24" tall x 24" deep.
http://the-natural-aquarium.com/48interr.html

Good luck!
 
there is no sunlight just lamps
on thr top are 6X 32W fluresent (energey saving) lamps
in the mid another 4X 32W lamps
arie
 
hi Arie, that one I build right now is 1.20x0.60x1.00. But I am not yet sure how many and what kind of lamps I will use.

Oh- mine is for lowland Nepenthes only.
 
Back
Top